Central Pneumatic 93305 - Table of Contents

For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
SKU 93305 Page 2
IMPORTANT: Before using for the rst time, the spray gun must be cleaned
using a solvent based thinner. If not removed, the red oil used by the
manufacturer for testing and corrosion protection may contaminate paint.
IMPORTANT: The Spray Gun must be cleaned immediately after use.
Improper cleaning is a common reason for the Spray Gun not to work.
Contents
Specications ................................................................................................. 3
Safety Warnings and Precautions ................................................................ 3
Unpacking ....................................................................................................... 5
Air Connection ................................................................................................ 6
Control Layout ................................................................................................ 6
A Comparison: Conventional versus HVLP Spray Guns ............................ 7
Preparation...................................................................................................... 8
Fan Direction and Pattern Adjustment ......................................................... 8
Techniques .................................................................................................... 10
Maintenance ...................................................................................................11
Parts List ...................................................................................................... 12
Assembly Diagram ....................................................................................... 13
Troubleshooting ........................................................................................... 14
Limited 1 Year Warranty ............................................................................... 16