Centurion D5-EVO REPAIR User Manual

PROCEDURE FOR BACKING UP OR RESTORING USER DATA ON D-SERIES
CONTROLLERS.
1. Remove the encoder/origin 6-way plug from the controller and plug the memory
module into the 4-way connector.
2. Press and hold the oblong button
for approximately 2 seconds.
3. A screen will appear displaying the text “Setting Limits”; press the up arrow button
twice. The screen will display “General settings”.
4. Press and release the oblong button
(don’t hold it).
5. Using
Select Backup EEPROM if you wish to transfer all controller user data to
the Memory Module or select Restore EEPROM using the up/down arrow buttons if
you wish to download all user data from the memory module to the controller .
6. Once you have made the selection press and release the oblong button
once
(a) For the backup procedure, the screen displays: “Back up date with Time
No”.
• Using
buttons, select Yes and then press the oblong button
once.
• The display will indicate backing up EEPROM; wait until it displays
backup successful.
• The screen will revert to displaying “backup EEPROM”.
• Press and release the round/exit button
twice to exit the menu.
The Memory Module can now be removed from the DOSS plug.
(b) For the Restore EEPROM procedure, the screen will display: “Back up date
with Time No”
• Using
button select Yes and then press the oblong button .once
.
• The display will indicate Restoring EEPROM; wait until it shows
Restoring successful.
• The screen will revert back to “Restore EEPROM”.
• Press and release the round/exit button
twice to exit the menu.
The Memory Module can now be removed from DOSS plug.
TECHNICAL SUPPORT | 0860 0860 236 887TECHNICAL SUPPORT | 0860 0860 236 887www.centsys.com www.centsys.com
D5-EVO REPAIR
MENU STRUCTURE CONTINUED
6. Infrared Beams
6.1. PIRAC Control • PIRAC Status
• Stop on Open
• Stop on Open Status
• Stopping Distance
6.2. IR Beam Test • Status
• Test Beam
6.3.
IRBO=IRBC on
Closing
6.4. IR Beam Alarms • Ambush Alarm
• Break-in Alarm • Alarm Output
7. Pedestrian
7.1. Pedestrian Open Position 7.2. Pedestrian Autoclose Time
7.3. Pedestrian pre-open Delay 7.4. Pedestrian pre-close Delay
9. ChronoGuard
9.1. Time and Date
9.2. Time-Periods • Add Time-Period • Auto Function
• Time-Bar
• Delete Time-Period
• Edit review Time-Periods
9.3. Exclusions • Add Exclusion • Auto Function
• Time-Bar Function
• Delete Exclusion
• Edit Review
9.4. Delete all Time-Periods and Exclusions
8. Courtesy Light
8.1. Courtesy Light Timer
8.2. Courtesy Light Prole • Courtesy Light
• Pre-ash A • Pre-ash B
• Pre-ash C
10. General settings
10.1. Operating Standard
10.2. Reset Options • Factory Defaults
• Delete all Remotes
• Delete all Time-Periods and Exclusions
• Reset All
10.3. Diagnostic Screen Status
10.4. Test Button Disabled Status
10.5. Backup EEPROM
10.6. Restore EEPROM
SERVICE EXCHANGE D5 INSERT 3.indd 1 2017-02-16 11:12:25 AM

Centurion D5-EVO REPAIR Specifications

General

Motor Voltage	24V DC
Protection Rating	IP54
Battery Backup	Yes
Collision Sensing	Yes
Control Options	Remote control
Safety Features	Obstacle detection