Need help?Do you have a question about the Centurion D2 Turbo and is the answer not in the manual?
Procedure for manually disengaging and re-engaging the gate operator's drive mechanism, including steps for disengagement and re-engagement.
Details on basic gate operation, including opening, closing, and modes.
Explains the three operational modes: Standard, Open Only, and Reversing.
Configures the gate to automatically close after a set time delay.
Adjusts the system's response to obstructions to prevent crushing.
Details on using optional safety beams for enhanced protection.
Protects the battery by limiting motor operation when voltage is low.
Procedure for setting the gate's open and closed limits.
Instructions for adding, deleting, or managing remote controls.
Steps to add rolling code remote controls to the system.
How to remove individual remote controls from the receiver's memory.
General| Motor Voltage | 24V DC |
|---|---|
| IP Rating | IP54 |
| Collision Sensing | Yes |
| Battery Backup | Optional |
| Motor Type | DC |
| Control Options | Remote, Keypad, Loop Detector |
| Warranty | 2 years |
| Input Voltage | 230V AC |
| Safety Features | Obstruction detection |
To Next Page
