Need help?Do you have a question about the Centurion Auto-Mate and is the answer not in the manual?
Identifies the components included in the swing gate kit.
Illustrates how to mount the control box and associated wiring.
Covers steps for positioning the pedestal for inward opening gates.
Provides 'Z' values and angles for drive arm dimensions.
Details pedestal positioning for gates that open outwards.
Provides instructions for mounting pedestals on walls for inward opening gates.
Details wiring for motors and their limit switches.
Covers wiring for radio receivers and intercom systems.
Explains connections for solenoid/magnetic locks and infra-red safety beams.
Details wiring for pedestrian keyswitches, holiday lockout, and exit loops.
Covers pillar light connections, battery charger, and PSU wiring.
Explains recommended earthing for lightning and solar panel connections.
Guides on applying power and connecting the battery for system operation.
Details setting motor direction and limit switch polarity.
Provides instructions for adjusting the gate's limit switches.
General| Motor Voltage | 24V DC |
|---|---|
| Maximum Gate Length | 8 meters |
| Operating Temperature | -20°C to +50°C |
| Battery Backup | Yes |
| Power Supply | 220-240V AC |
| Motor Type | DC Motor |
| Maximum Gate Weight | 500 kg |
| Remote Control | Yes |
| Safety Features | Obstacle detection |
| Warranty | 24 months |
To Next Page