Need help?Do you have a question about the Centurion Maxi-Mate and is the answer not in the manual?
Overview of the gate automation system and its benefits.
Identifies components included in the swing gate kit.
Procedure to measure and set the desired gate opening angle.
Guide for affixing the gate bracket at the correct dimension.
Determining the optimal placement for the gate operator pedestal.
Steps for pedestal installation and attaching gearbox/hardware.
Affixing the gate bracket to the gate based on calculated dimensions.
Setting the correct vertical height for the wall mount pedestal.
Final placement and securing of the wall mount pedestal.
Wiring details for CP77 and CP87 controllers.
Connecting motors, limit switches, and radio components.
Wiring for intercoms, locks, beams, and key switches.
Wiring for power supplies, battery chargers, and earthing.
Configuring dip switches and timers for operational modes.
Procedures for connecting mains power and backup battery.
Ensuring correct motor direction and limit switch function.
General| Motor Voltage | 24 V DC |
|---|---|
| Maximum Gate Mass | 500 kg |
| Motor Type | DC Motor |
| Protection Rating | IP54 |
| Maximum Gate Length | 6 m |
| Battery Backup | Yes |
| Control Options | Remote control, keypad, loop detector |
To Next Page
