Cerber C816 - General Features

2
General Features
• Central unit's core of powerful RISC microprocessor;
• The electrical features include an EEPROM memory for programmed configuration, system/partitions status and LOG buffer to be retained even
in case of a total power loss;
• User-friendly programming of the system parameters, from keypad or by PC (using “EZcom C612&C816 Software”);
• Up to 800 events with time and date stamp stored in a FIFO LOG buffer;
• “False alarm prevention” features: intellizones, automatic zone shutdown, beeps on entry and exit delays;
• Features of “sensor under test” for easy detection of sensors causing false alarms.
• High-speed pre-programmed or entirely programmable Communication Formats;
• 45 user codes (1
-st
being “master code”) and 2 installer’s codes (programming and maintenance codes);
• Keypad displayed alarm memory for first 9 alarms occurred in the system since last arming;
• Up to 8 keypads which can be simultaneously 4-wire coupled to one central unit;
• Keypad protection using micro-switch tamper;
On KP126P/KP164P LED keypad:
• Individual Zone LEDs from 1 to 12/16, indicating the alarm and faulted status;
• System status LEDs: SYSTEM, ARMED A and ARMED B, READY A and READY B, and BYPASS;
On KP16LCD and KP16LCDL keypads all the system status, zone activity, zone descriptors and command instructions can be read from the LCD
alphanumeric display.
User Codes
45 programmable “user codes” (1
-st
being “master code”) with 19 programmable rights:
• Zone bypassing;
• Regular arming;
• Stay arming;
• Force arming;
• Disarming/siren stopping;
• Access to partition A;
• Access to partition B;
• Access from phone line
• PGM1 activating/deactivating;
• PGM2 activating/deactivating;
• PGM3 activating/deactivating;
• PGM4 activating/deactivating;