Cerber C816 - Page 22

22
29
Voice message for “TAMPER ALARM FROM THE FOLLOWING ZONES”
Tamper alarm from the following zones
30
Voice message for “KEYPAD TAMPER ALARM”
Keypad tamper alarm
31
Voice message for “EMERGENCY ALARM FROM THE FOLLOWING ZONES”
Emergency alarm from the following zones
32 Voice message for “KEYPAD EMERGENCY ALARM” Keypad emergency alarm
33 Voice message for “BURGLARY ALARM FROM THE FOLLOWING ZONES” Burglary alarm from the following zones
34 Voice message for “AC POWER LOSS” Ac power loss
35 Voice message for “VOLTAGE_BATTERY_TO_LOW” Voltage battery too low
36
Voice message for “SYSTEM STATUS IS ARMED”
System status is armed
37
Voice message for “FIRST PARTITION STATUS IS ARMED”
First partition status is armed
38
Voice message for “SECOND PARTITION STATUS IS ARMED”
Second partition status is armed
39 Voice message for “SYSTEM STATUS IS DISARMED” System status is disarmed
40 Voice message for “FIRST PARTITION STATUS IS DISARMED” First partition status is disarmed
41 Voice message for “SECOND PARTITION STATUS IS DISARMED” Second partition status is disarmed
42 Voice message for WELCOME MESSAGE
Welcome to your C612 panel! Enter your
phone access code, please!
5.2
seconds
43 Voice message for HEADER MESSAGE This is your C612 security system calling
44 Voice message for CHOOSE PARTITION
Choose partition, press key 1 for partition A,
key 2 for partition B
45 Voice message for “ALLOWED FUNCTION ONLY WHILE STAY ARMED” Function allowed only while stay armed
46 Voice message for “MAJOR EVENT OCCURRED AND MUST REPORT”
Wrong access code or without phone line
access
47 Voice message for “USER WITHOUT ACCESS TO PGMs AND ROUNDs” User without access to PGMs and rounds
48 Voice message for “DANGEROUS COMMAND AND MUST HANG UP” Major event occurred and must report
2.6
seconds
49
Voice message for “PGMs AND ROUNDs MENU”
PGMs and rounds menu
50
Voice message for “USER WITHOUT ACCESS TO PARTITIONS”
User without access to partitions
51 Voice message for “ZONE WITHOUT BYPASS ENABLE” Zone without bypass enable
52 Voice message for “DISARM FIRST PARTITION FOR BYPASS” Disarm first partition for bypass
53 Voice message for “DISARM SECOND PARTITION FOR BYPASS” Disarm second partition for bypass
54 Voice message for “ZONE DO NOT BELONG TO FISRT PARTITION” Zone doesn’t belong to first partition
55
Voice message for “ZONE DO NOT BELONG TO SECOND PARTITION”
Zone doesn’t belong to second partition
56
Voice message for “SWITCH TO BYPASSING LOW ZONES”
Switch to bypassing low zones
57
Voice message for “SWITCH TO BYPASSING HIGH ZONES”
Switch to bypassing high zones
58 Voice message for “ZONE BYPASSING MENU” Zone bypassing menu
59 Voice message for “ZONE BYPASSED SUCCESSFULLY” Zone bypassed successfully
60 Voice message for “ZONE UNBYPASSED SUCCESSFULLY” Zone un-bypassed successfully
61 Voice message for “NO LOW ZONES BYPASSED” No low zones bypassed
62 Voice message for “NO HIGH ZONES BYPASSED” No high zones bypassed
63
Voice message for “THE FOLLOWING LOW ZONES ARE BYPASSED”
The following low zones are bypassed
64
Voice message for “THE FOLLOWING HIGH ZONES BYPASSED”
The following high zones are bypassed
65 Voice message for “PGM TYPE DOESN’T ALLOW USER CONTROL” PGM type doesn’t allow user control
66 Voice message for “NEITHER PGMs NOR ROUNDs ARE ACTIVATED” Neither PGMs nor rounds are activated
67 Voice message for “THE FOLLOWING PGMs ARE ACTIVATED” The following PGMs are activated