Cerber C816 - Page 73

73
MaintRqKp
Maintenance request triggered from keypad
FireRqKp
Fire alarm triggered from keypad
PanicRqKp
Panic alarm triggered from keypad
MedicalRqKp Medical Emergency Alarm triggered from keypad
MasterEnterPr
Master enters programming mode
MasterExitPr Master exits programming mode
MasterChgPr Master changed programming values
FailCommCS1/CS2
Fail to report to CS1 and CS2
FailCommCS1
Fail to report to CS1
FailCommCS2 Fail to report to CS2
RoundEff Z Round accomplished on zone
RoundFailZ
Round failed on zone
AmbushRoundZ
Ambush round on zone
InstallAborted Installer aborted phone transmission
MastAborted Master aborted phone transmission
NoEv
No events
PhTr
Troubles on phone line
PhTrRestore Troubles on phone line restore
PGMActPC PGM activation by PC
PGMActby
PGM activation by user
PGMDeactPC
PGM deactivation by PC
PGMDeact PGM deactivation by user
RoundStartPC Round started by PC
RoundStartT
Round started by time
RoundStart
Round started by user
RoundFinishPC
Round finished by PC
RoundFinishT Round finished by time
RoundFinish
Round finished by user
BypassSwngZ:
Zone xx bypassed from swinger
BypassZ: Zone xx bypassed
BurglaryZ: Burglary alarm on zone xx
TampAl.Z:
Tamper alarm on zone xx
PanicAl.Z:
Panic alarm on zone xx
FireAl.Z: Fire alarm on zone xx
MedEmAl.Z: Medical Emergency alarm on zone xx
SuTCBOnZ:
Sensors under test closed back on zone xx
A:SuTCBOnZ:
Partition A, Sensors under test closed back on zone xx