www.szceres.com Shenzhen Ceres Wireless Router User Manual
4
1 About This Guide
This guide is a complementation of Quick Installation Guide. The Quick Installation Guide
instructs you on quick Internet setup, and this guide provides details of each function and shows
you the way to configure these functions appropriate to your needs.
When using this guide, please notice that features of the router may vary slightly depending on
the model and software version you have, and on your location, language, and Internet service
provider. All screenshots, images, parameters and descriptions documented in this guide are used
for demonstration only.
2 Note
2.1 Installation Precautions
Do not place the equipment near flammable or conductive items, high temperatures (such
as direct sunlight) or in wet conditions, or on a PC chassis, and check that the surrounding
appliances are stable.
Check the cable for aging. Check and verify that the AC or DC input voltage is within the
permissible range of the device and that the polarity of the DC is correct.
Unless the manufacturer permit, use the type of power indicated on the label and the
adapter supplied with the product.
To prevent damage to the product from lightning, make sure that the ground of the power
outlet and the power adapter is securely grounded. In the thunderstorm, be sure to unplug
the power and all the connections.
Equipment input voltage fluctuation should be less than 10%, the power plug, refrigerators,
hair dryer and iron should not use the same socket.
To avoid electric shock or fire due to overload of the power outlet, damage to the cord or
damage to the plug, check the power cord regularly. If damage is found, replace it
immediately.
Please place the device on a flat surface and can not place items on the device.
Equipment is easy to produce heat when working, should maintain the appropriate cooling
space to avoid damage caused by overheating products. The elongated hole on the shell is
designed for heat dissipation. Keep the ventilation clean and avoid falling from the heat sink
into the equipment. Otherwise, the equipment may be damaged or fire. Do not spill liquid
onto the surface of the equipment.
To Next Page
Loading...
Need help?
General