102
MAINTENANCE
KEY POINTS OF LUBRICATION SCHEDULE:
Check all components at the intervals outlined in the Periodic Maintenance Schedule. Items not lied in the
schedule should be lubricated at the general lubrication interval.
● Change lubricants more often under severe use, such as wet or dusty conditions.
● Use All Season Grease on pivot points�
● Lubricate every 500 miles (800 km), before long periods of storage, after pressure washing, or after
submerging drive system.
Item Lubricant Method
Engine oil
SAE 10W-40
SAE 5W-40 / SAE 15W-40
(See page 74 for oil viscosity chart)
Screw o, clean, insert and pull out
dipick to check oil level
Transmission oil
SAE80W-90 GL-5
Screw o, clean, insert and pull out
dipstick to check oil level
Brake uid DOT4
Keep level between
upper and lower lines
Front gear case oil
SAE80W-90 GL-5
Oil capacity: 7�8 oz� (230mL)
Rear gear case oil
SAE80W-90 GL-5
Oil capacity: 13�5 oz� (400mL)
Suspension pivots and drive train All Season Grease
Grease gun - Pump grease until it
begins to ow from the pivot point
To Next Page
Loading...
Need help?
General
