CF MOTO CFORCE 800XC - 2 WD; 4 WD System Switch; “F-Lock” Operation

52
FEATURES & CONTROLS
B
A
3
2WD / 4WD System Switch
This vehicle is equipped with on-command “2-WD”/”4-WD” and ”4-
WD/F-LOCK” switches. Activate these switches according to the
traction required for di󰀨erent driving conditions.
A
: Switches two wheel drive (2-WD) and four wheel drive (4-WD)�
B
: Switches four wheel drive (4-WD) and four wheel drive lock
(F-lock)�
WARNING
The vehicle should be stopped before applying or releasing the
function of 2WD/4WD/F-lock� Applying or releasing drive modes
while the vehicle is in motion can lead to component damage�
“F-lock” Operation
In “F-lock” mode, both front axles are locked together and rotate
at the same speed to provide maximum front wheel traction� The
steering will require more force for turning� The drive mode indicator
on the dashboard will ash until front di󰀨erential lock is engaged.
Riding before the differential is properly engaged (e.g. when the
indicator light is ashing) will cause the engine speed to be limited
until engagement is complete�
Maximum traveling speed in F-lock is limited to 22 mph (30 km/
h). If conditions require full engine power to be available, press the
override switch on the left control to disable speed limiting.
Vehicles without rear di󰀨erential