88
OPERATION OF YOUR ATV
Driving in reverse
To operate in reverse:
1� Ensure the throttle is closed and the vehicle is stopped
completely�
2� Apply the foot brake, then shift the transmission into reverse
gear�
3� Check for obstacles or people behind the vehicle.
4� When it’s safe to proceed, release the brakes, slowly press the
throttle with your right thumb, and back slowly. Vehicle speed is
controlled by the amount of throttle opening.
NOTE
Your ATV is equipped with a reverse speed limiter� The override
button cannot be used. Do not operate at wide open throttle. Open
the throttle just enough to maintain a desired speed�
Follow these precautions when operating in reverse:
● Always avoid backing downhill.
● Back slowly�
● When in reverse, apply the brakes lightly for stopping.
● Avoid turning at sharp angles in reverse�
● Never open the throttle suddenly while backing.
WARNING
Failure to use caution when operating in reverse can result in serious
injury or death�
To Next Page