60
FEATURES & CONTROLS
Transmission Gear Selector
The transmission gear selector
1
is located on the left side of the
vehicle�
1
L: Low Gear
H: High Gear
N: Neutral
R: Reverse
P: Park
CAUTION
Always stop the ATV and press the foot brake pedal before shifting the transmission. Shifting gears with the
engine speed above idle or while the vehicle is moving could cause transmission damage.
To change gears, stop the vehicle, and with the engine idling, move the lever to the desired gear� Whenever
the ATV is left unattended, always place the transmission in the PARK position� Maintaining shift linkage
adjustment is important to assure proper transmission function� See your dealer if you experience any shifting
problems.
To Next Page