85
OPERATION OF YOUR ATV
Driving procedure
1� Sit upright with both feet on the footrests and both hands on
the handlebars.
2� Start the engine and allow it to warm up. Apply the foot brake,
then shift the transmission into low gear�
3� Check your surroundings and determine your path of travel�
4� Release the brakes.
5� Slowly press the throttle with your right thumb and begin
driving. Vehicle speed is controlled by the amount of throttle
opening�
6� Drive slowly� Practice maneuvering while using the throttle and
brakes on a level surface.
To Next Page
Loading...
Need help?
General
