CHAFFOTEAUX NIAGARA C 25 CF User Manual

28
User's manual
GB
User's manual
Setting day and night temperatures for heating zone
If the boiler is connected to a bus device (e.g. remote control CLIMA
MANAGER), the desired ambient temperature can be set for day and
night according to the schedule programme entered.
In central heating mode, the ignition and operation of the boiler are
used to reach and maintain set temperatures.
Setting day temperature “Zone1 T Day”
To set day temperature , proceed as follows:
-
press the MENU/OK button, the display will ash 000
-
turn the CH knob to select the menu400 - “Zone1
Parameters”
-
press the MENU/OK button to access the sub-menu, the display
will ash 00 - “Setpoints”
-
press the MENU/OK button to access the parameters, the display
will ash 400 - “Zone1 T Day”
-
press the MENU/OK button to modify the parameter;
-
turn the CH knob to select the new temperature;
- p
ress the MENU/OK button to conrm
-
press the ESC button to restore the normal display screen.
To set the day temperature - heating zone 2 (if present) proceed as
Heating Zone 1 selecting menu 5.
Setting night temperature “Zone1 T Night”
To set the night temperature , proceed as follows:
-
press the MENU/OK button, the display will ash 000
-
turn the CH knob to select the menu400 - “Zone1
Parameters”
-
press the MENU/OK button to access the sub-menu, the display
will ash 00 - “Setpoints”
-
press the MENU/OK button to access the parameters, the display
will ash 400
- turn the encoder to select the parameter 401
- “Zone1 T Night”
-
press the MENU/OK button to modify the parameter;
-
turn the CH knob to select the new temperature;
- p
ress the MENU/OK button to conrm
-
press the ESC button to restore the normal display screen.
To set the night temperature - heating zone 2 (if present) proceed as
Heating Zone 1, selecting menu 5.
Set xed ow temperature on the heating zone
The parameter is used to modify the heating ow temperature if the
temperature regulation at a xed value is activated.
The temperature of Zone 1 and Zone 2 (if present) may be adjusted.
To modify the temperature set, proceed as follow:
-
press the MENU/OK button, the display will ash 000
-
turn the CH knob to select the menu400 - “Zone1
Parameters”
-
press the MENU/OK button to access the sub-menu, the display
will ash 00 - “Set points”
-
press the MENU/OK button to access the parameters, the display
will ash 400
- turn the CH knob to select the parameter 402
- “FIX Temp”
- turn the CH knob
to select the new temperature;
- p
ress the MENU/OK button to conrm
-
press the ESC button to restore the normal display screen.
To set the Fixed temperature - heating zone 2 (if present) proceed as
Heating Zone 1, selecting menu 5.
T ambiance comfort
T ambiance réduite
Temp fixe CH
Zone 1 T Day
Zone 1T Night
Fix Temp

CHAFFOTEAUX NIAGARA C 25 CF Specifications

General

Brand	CHAFFOTEAUX
Model	NIAGARA C 25 CF
Category	Boiler
Language	English