CHAINTECH VNF4/Ultra - 3-2 Advanced BIOS Features; 3-3 Advanced Chipset Features; 3-7 PC Health Status

Chapter 3
19
3-2 Advanced BIOS Features
The motherboard manufacturer determines all of these settings. The default values
should not be modified unless necessary.
3-3 Advanced Chipset Features
The motherboard manufacturer determines all of these settings. The default values
should not be modified unless necessary.
All of the above settings have been determined by the mother
board
manufacturer and should not be changed unless you are absolutely sure of
what you are do
ing. Explanations of the DRAM timing and chipset features
setup are lengthy, highly technical and beyond the scope of this manual. Below
are some brief descriptions of the functions in the Setup menu.
3-4 Integrated Peripherals
This section provides information on setting up the peripheral devices. The
motherboard manufacturer determines all of these settings. The default values should
not be modified unless necessary.
3-5 Power Management Setup
This section provides information on the Green PC power management functions. The
motherboard manufacturer determines all of these settings. The default values should
not be modified unless necessary.
3-6 PNP/PCI Configurations
This section provides IRQ and DMA setting information. The motherboard
manufacturer determines all of these settings. The default values should not be
modified unless necessary.
3-7 PC Health Status
The motherboard manufacturer determines all of these settings. The default values
should not be modified unless necessary. This field shows you the current system
temperature/external voltages input and the current CPU FAN and System FAN
operating speed.
3-8 Frequency/Voltage Control
The motherboard manufacturer determines all of these settings. The default values
should not be modified unless necessary.