EasyManua.ls Logo

CHAINTECH VNF4/Ultra - 1-1 Specifications

CHAINTECH VNF4/Ultra
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 1
1
Chapter 1 Introduction
1-1 Specifications
CPU
- Supports AMD Socket-939 Athlon 64 FX / Athlon 64
- Processor interface via 2000MT/s Hyper Transport bus
Chipset
- NVIDIA nForce4 (VNF4) / nForce4 Ultra (VNF4 Ultra)
Memory
- Four 184- pin DDR DIMMs up to 4GB
- Supports Dual Channel DDR266/333/400 memory
Expansion Slots
- One PCI Express x16 port for PCI Express graphics card
- Two PCI Express x1 ports
- Three 32-Bit PCI slots (v2.3 compliant)
7.1- Channel Audio
- Supports enhanced NVIDIA 7.1-channel audio
- Complies with AC97 Rev 2.3 specifications
- Six audio jacks with automatic jack sensing
- Supports 48KHz coaxial S/PDIF output
- EAX/Direct Sound 3D/13DL2/A3D compatible
SATA
- Supports four native SATA 1.5Gb/s devices (VNF4)
- Supports four native SATA2 3.0Gb/s devices (VNF4 Ultra)
- Hot-swap capability, allowing disks to be changed without powering down
the system.
- Optimized for the high-performance NVIDIA RAID technology
- Supports SATA ATAPI devices
IDE
- Supports 2 UltraDMA-66/100/133 IDE ports
FDD
- One FDD connector supports up to 2.88MB
USB 2.0
- Supports total 10 USB 2.0 ports with High-Speed Device @ 480 Mb/s
Transfer Rates
NVIDIA Gigabit Ethernet
- Supports 10/100/1000Base-T Gigabit Ethernet with external PHY

Table of Contents

Related product manuals