Models 24012 (E, W, EW, XL, LR, AR)
Installation, Operation and Maintenance
File: 24107
8
Rev. 01.09.01
The Owner/Employer shall display the operating instructions and “Lifting It Right” and
“Safety Tips” Literature supplied with the lift in a conspicuous location in the lift area
convenient to the operator.
The Owner/Employer shall establish procedures to periodically maintain, inspect, and
care for the lift in accordance with the manufacturer’s recommended procedures to
ensure its continued safe operation.
The Owner/Employer shall provide necessary lockout/tagouts of energy source per
ANSI Z244.1-1982 before beginning any lift repairs.
The Owner/Employer shall not modify the lift in any manner without the prior written
consent of the manufacturer.
Raising Vehicles:
1. Drive the vehicle onto lift. Set the parking brake.
2. Push the power button on the power unit to raise the vehicle to the desired
height.
3. Depress the lowering valve handle on the power unit to lower the lift onto the
safety latch.
4. Before walking under the lift, verify that the safety latch locking pin is
positioned in the latch rack under the top rail tube.
Lowering Vehicles:
1. Raise the lift off the safety latch by pushing the raise button on the power unit.
To Next Page
Loading...
