To Next PageTo Next Page
Need help?Do you have a question about the Challenger Lifts 4P14EFX and is the answer not in the manual?
General| Brand | Challenger Lifts |
|---|---|
| Model | 4P14EFX |
| Category | Lifting Systems |
| Language | English |
Ensure adequate vertical space and proper concrete flooring for lift installation.
Verify lift location suitability and ensure correct electrical and air supply.
Inspect shipment for damage, verify components against packing list.
Gather necessary tools and plan the service bay layout for installation.
Position runways, assemble cross beams, and route cables and air lines.
Install columns, secure them to cross beams, and anchor to the floor.
Connect hydraulic and air lines, mount power unit and valve assembly.
Properly affix safety and logo decals to the lift columns as specified.
Understand owner responsibilities for safe operation, inspection, and maintenance.
Follow instructions for safe vehicle lifting, lowering, and general operation.
Adhere to fundamental safety rules, including wearing safety glasses.
Properly drive onto lift, engage locks, and lower vehicle safely.
Consult factory for issues with locks not retracting or lift not raising.
Perform daily, weekly, and monthly checks on lift components and structure.
Identify major lift components and their general layout.
Reference part numbers for hydraulic cylinder, runways, columns, and power unit.
Details of cables, nuts, washers, and cable pull bar.
Information on sheaves, bearings, pins, and spacers for runways.
Parts list for cross beam assembly, including locks, pawls, and sheaves.
List of parts for the air lock release system, including valves and air lines.
