Challenger 670B - Front of Combine

General Information
01-26 79032966 A Rev.
Front of Combine
FIG. 41: Main drive axle outer coupler (1). The
right-hand is shown, the left-hand coupler is on the
opposite side. One fitting each coupler (100 hours).
FIG. 42: Front axle, inner driveshaft couplings.
One fitting (1) each side of transmission (100 hours).
FIG. 43: Feeder house pivot (1).
Two fittings (1),one each side (10 hours or daily).
FIG. 44: Front of feeder house, lateral tilt (if equipped).
Lateral tilt bearings - two fittings (1) (100 hours).
Lateral tilt pivot pin - one fitting (2) (100 hours).
FIG. 41
1
N722107
FIG. 42
1
LA06503
FIG. 43
1
1
N722113
FIG. 44
1
2
M306922