General Information
01-42 79032966 A Rev.
Check and add brake fluid to reservoir.
m
WARNING: Incomplete bleeding and
allowing air to remain in the system will
lead to poor braking performance and
possible loss of braking capability.
FINAL DRIVE
Combines are equipped with a heavy-duty front axle. The
heavy-duty final drives use a bull gear and pinion.
FIG. 89: Maintain oil level within 12.0 mm (0.5 in) of the
top edge of the cap (1) in both final drive housings.
Check the oil level and breather every 250 hours of
operation.
Change the oil every 500 hours or once a season.
FIG. 89
1
LA06277
To Next Page
Loading...
