To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain 8587 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Drive | Chain |
| Horsepower | 1/2 HP |
| Max Door Height | 7 feet |
| Smart Technology | Yes |
| Battery Backup | Yes |
| Connectivity | Wi-Fi |
| Security | Rolling Code Technology |
| Speed | 7 inches per second |
| Motor | DC motor |
| Safety Features | Safety sensors |
| Smart Home Compatibility | Works with MyQ |
| Warranty | Lifetime motor warranty |
| Remote Controls Included | 2 remotes |
Explains safety symbols and signal words for injury prevention.
Guides on checking door balance, operation, and seal before installation.
Lists all tools required for installation and preparation tasks.
Lists all parts included in the garage door opener assembly and accessories.
Details compatible MyQ and Security+ 2.0 accessories.
Step-by-step instructions for attaching the rail to the motor unit.
Instructions for installing the chassis support bracket.
Steps to properly tension the chain for the garage door opener.
Crucial safety warnings and instructions before starting the installation.
Detailed list of critical safety precautions to prevent injury or death.
Guides on finding and marking the correct location for the header bracket.
Provides options for wall or ceiling installation of the header bracket.
Instructions for connecting the garage door opener rail to the header bracket.
Steps for safely positioning the garage door opener unit.
Detailed steps for securely mounting the garage door opener unit.
Guidance on installing appropriate light bulbs for the opener.
Instructions for attaching the emergency release mechanism.
Steps for attaching the door bracket to the garage door.
Steps to connect the door arm to the opener's trolley.
Instructions for physically mounting the door control unit.
Overview of door control compatibility and installation location.
Steps for connecting the door control wiring to the opener.
Instructions for placing entrapment and safety test labels.
Explains the function and importance of the safety reversing sensors.
Details on sensor alignment, function, and LED indicators.
Provides options for attaching sensors to door track or wall.
Instructions for floor installation of safety reversing sensors.
Steps for wiring the safety reversing sensors without pre-wiring.
Instructions for wiring safety reversing sensors with pre-installed wires.
Instructions for connecting power via typical or permanent wiring.
Details on typical plug-in connection and permanent wiring options.
Steps to check and align safety reversing sensors for proper operation.
Verifies the correct wiring of the door control unit.
Explains how adjustments program door travel limits and force.
Identifies the buttons used for programming and adjustments.
Step-by-step guide to programming the door's open and close travel limits.
Procedures for testing the safety reversal system with an obstruction.
Tests the functionality of the safety reversing sensors.
Critical safety guidelines for operating the garage door opener.
Describes the visual and audible alert for unattended door closing.
Explains the automatic door closing feature and its settings.
Details the MyQ technology for remote communication.
Information on factory programming and compatibility of remotes/controls.
Explains the energy-saving sleep mode feature.
Information on when the opener lights turn on and bulb compatibility.
How to operate the opener using various controls.
Instructions for operating the main door control features.
Steps to pair the door control with the garage door opener.
Explanation of push bar, navigation buttons, and display screen.
Lists and explains features programmable via the door control menu.
Guide to programming features via the Smart Control Panel.
Details of SCREEN, FEATURES, SETTINGS, and SERVICE menus.
Steps to program remotes/keypads using the door control interface.
Instructions for programming remotes directly with the opener's learn button.
Procedures for clearing all stored remote control and keyless entry codes.
Steps to disconnect the trolley for manual door operation.
Instructions for reconnecting the trolley after manual operation.
Monthly tasks: manual operation check, safety reversal test.
Annual maintenance tasks like lubricating opener parts.
Rail lubrication for long-term performance every 2-3 years.
Safety warnings related to battery replacement and handling.
Step-by-step instructions for replacing remote control batteries.
Correlates diagnostic codes with symptoms and solutions for opener issues.
Continues the diagnostic chart for further troubleshooting.
Explains common reasons for opener beeping and operational issues.
Internet enabled accessory for remote monitoring and control.
Monitor open/closed status for openers and gates.
Control lights using opener, remote, or gateway.
Automatic control of lights via opener, remote, or gateway.
Laser system for precise vehicle parking in the garage.
Protects openers from lightning and power surges.
External access using a 4-digit PIN.
Various 3-button MAX remote controls.
2 & 4 button learning remote controls.
Panel for diagnostics, temperature, and door control.
Panels with motion sensor for light activation or auto-close.
Details the five-year limited warranty for the product.
Specifies the lifetime limited warranty for the motor.
Lists part numbers for rail assembly components.
Lists part numbers for various installation components.
Lists part numbers for major garage door opener components.
Provides phone numbers and website for service and support.
