To Next PageTo Next Page
Need help?Do you have a question about the Chamberlain AccessMaster M885 and is the answer not in the manual?
General| Type | Chain Drive |
|---|---|
| Horsepower | 1/2 HP |
| Max Door Weight | 500 lbs |
| Drive System | Chain |
| Security | Rolling Code Technology |
| Max Door Height | 7 feet |
| Remote Control | Yes |
| Battery Backup | No |
Explains safety symbols and signal words used in the manual for hazard identification.
Instructions to check the garage door for balance, binding, and proper fit before installation.
Lists all parts included in the garage door opener package for verification.
Details all hardware required for installation and door control setup.
Step-by-step guide to attach the opener rail to the motor unit securely.
Instructions on how to properly tension the opener's chain for correct operation.
Guides on selecting the correct position for the header bracket on the wall or ceiling.
Detailed instructions for wall or ceiling mounting of the header bracket.
Connects the opener rail to the installed header bracket using a clevis pin.
Guides on placing the opener unit correctly on a ladder or support.
Steps for securely mounting the opener unit to the garage ceiling or supports.
Instructions for installing light bulbs and the protective lens.
Guides on attaching the manual release rope and handle for safety.
Steps to attach the bracket to the garage door for arm connection.
How to connect the door arm to the opener's trolley assembly.
Instructions for mounting the wall-mounted door control unit.
Connects the door control wires to the garage door opener unit.
Instructions for applying safety and instruction labels to the wall and door.
Details mounting the safety sensors on door tracks or walls.
Guides on connecting the safety sensors to the opener unit.
Connects pre-installed wires to the safety reversing sensors.
Instructions for connecting the garage door opener to a power source.
Checks and aligns the safety reversing sensors for proper operation.
Verifies the door control unit has been wired correctly.
Sets the open and close limits for the garage door opener.
Verifies the safety reversal system functions correctly.
Tests the functionality of the safety reversing sensors.
Details compatibility and memory capacity for various accessories.
Explains how safety reversing sensors detect obstructions and their function.
Describes the opener's sleep mode and energy-saving features.
Information about the opener's light bulb and automatic operation.
Steps to pair the door control with the garage door opener.
How to program remote controls and accessories via the door control.
Security feature to disable remote control operation.
How to activate and deactivate the automatic light feature.
How to activate and deactivate the maintenance alert system.
Steps to program remote controls using the opener or door control.
Instructions to clear all programmed remote and keyless entry codes.
Procedures for disengaging and re-engaging the trolley for manual door operation.
Recommended maintenance tasks and their frequency.
Guides on how to safely replace the battery in the remote control.
Lists diagnostic codes, symptoms, and solutions for opener issues.
Provides descriptions and part numbers for various compatible accessories.
Lists replacement parts for rail assembly and installation with part numbers.
Lists major opener components with part numbers and diagrams.
