Owner’s Manual
B1381C
Belt Drive Garage Door
Opener
FOR RESIDENTIAL USE ONLY
PRE-PROGRAMMED REMOTE
CONTROL INCLUDED
l Please read this manual and the enclosed safety materials
carefully!
l Fasten the manual near the garage door after installation.
l The door WILL NOT CLOSE unless the Protector System® is
connected and properly aligned.
l Periodic checks of the garage door opener are required to
ensure safe operation.
l The model number label is located on the left side panel of your
garage door opener.
l This garage door opener is compatible with myQ
®
and
Security+2.0® accessories.
l DO NOT install on a one-piece door if using devices or features
providing unattended close. Unattended devices and features are
to be used ONLY with sectional doors.
Contents
Preparation 2
Assembly 6
Installation 10
Install the Door Control 20
Install the Protector System® 22
Connect Power 26
Adjustments 28
Battery Backup 31
myQ® App Control 32
Connect With Your Smartphone 32
Operation 33
Using your Garage Door Opener 34
To Open the Door Manually 34
Smart Control Panel® 35
Remote Control and Keyless Entry 36
HomeLink® 36
To Erase the Memory 37
Maintenance 38
Troubleshooting 39
Accessories 41
Warranty 42
Repair Parts 43
www.chamberlain.com
To Next Page
Need help?
General
