32
myQ
®
App Control
Connect With Your Smartphone
Youwillneed:
l Wi-Fi enabled smartphone, tablet or laptop
l Broadband Internet connection
l Wi-Fi signal in the garage (2.4 Ghz, 802.11b/g/n required), see page 3
l Password for your home network (router's main account, not guest network)
l myQ
®
serial number located on the garage door opener
Download the myQ
®
Appto Set Upan Account andConnect
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door openers also
receive software updates to ensure the opener has the latest operational features.
1. Download the myQ
®
App.
2. Set up an account and connect.
For more information on connecting your garage door opener, visit support.chamberlaingroup.com.
Navigation
Buttons
An LED on the garage door
opener will indicate Wi-Fi
status. See table below.
LED
Learn
Button
To stop the Smart Control
Panel LCD from displaying
"CONNECT myQ APP":
On the Smart Control Panel
®
,
press MENU, select
PROGRAM and press ,
press BACK, then press EXIT
to return to the main screen.
Wi-Fi Status
LED Definition
Blue Off - Wi-Fi is not turned on.
Blinking - Garage door opener is in Wi-Fi learn mode.
Solid - Mobile device connected to the garage door opener.
Blue and Green Blinking - Attempting to connect to router.
Green Blinking - Attempting to connect to the Internet server.
Solid - Wi-Fi has been set up and garage door opener is connected to the internet.
NOTES:
myQ
®
App control WILL NOT work if the garage door opener is operating on battery power.
To erase the Wi-Fi settings, see page 37.
To Next Page
Loading...
Need help?
General
