Chamberlain B500 - User Manual

To Next Page

TO WATCH VIDEOS GO TO:

tinyurl.com/lgh5x3h

Preparation ...................................... 2-5

Assembly .......................................6-10

Installation ..................................11-28

Install the Door Control ............21-22

Install the Protector System® ....23-26

Power ......................................27-28

Adjustments .................................29-31

Operation ..........................................32

Features .......................................33

Using your Garage Door Opener .....34

Multi-Function Control Panel .... 34-35

Remote Control and

Keyless Entry ........................... 35-36

Homelink® ...................................36

To Erase the Memory .....................36

To Open the Door Manually ...........37

Maintenance .....................................38

Troubleshooting ........................... 39-40

Accessories ........................................ 41

Warranty ........................................... 42

Repair Parts .................................43-44

Contents

Owner’s Manual

B500 • B503 • B510

Belt Drive

Garage Door Opener

FOR RESIDENTIAL USE ONLY

PRE-PROGRAMMED REMOTE CONTROL

INCLUDED

www.chamberlain.com

www.mychamberlain.com

• Please read this manual and the enclosed safety materials carefully!

• Fasten the manual near the garage door after installation.

• The door WILL NOT CLOSE unless the Protector System

is connected

and properly aligned.

• Periodic checks of the garage door opener are required to ensure

safe operation.

• The model number label is located on the left side panel of your

garage door opener.

• This garage door opener is compatible with MyQ® and

Security+b2.0® accessories.

• DO NOT install on a one-piece door if using devices or features

providing unattended close. Unattended devices and features are

to be used ONLY with sectional doors.

Garage Opener

Need help?

Do you have a question about the Chamberlain B500 and is the answer not in the manual?

Summary

Assembly Instructions

Assemble Rail and Install Trolley

Step-by-step guide to assembling the rail and installing the trolley.

Fasten Rail to Motor Unit

Instructions for securely attaching the rail assembly to the motor unit.

Install the Drive Belt

Installation Procedures

Important Installation Instructions

Critical safety warnings and general instructions before starting installation.

Determine Header Bracket Location

Install Header Bracket

Install Safety Reversing Sensors

Instructions for installing and aligning the safety reversing sensors.

Adjustments and Testing

Program Garage Door Travel Limits

Test Safety Reversal System

Procedures for testing the safety reversal system's functionality.

Operation Guide

Important Operation Instructions

Key safety warnings and operational guidelines for using the garage door opener.

Troubleshooting

Troubleshooting Diagnostic Chart