TO WATCH VIDEOS GO TO:
tinyurl.com/lgh5x3h
Contents
Preparation ...................................... 2-5
Assembly .........................................6-9
Installation ..................................10-28
Install the Door Control ............20-21
Install the Protector System® ....22-25
Install the Automatic Door Lock ......26
Connect power ..............................27
Adjustments .................................29-31
Battery Backup ..................................32
MyQ® Smartphone Control .................33
Operation .....................................34-38
Using your Garage Door Opener .....35
To Open the Door Manually ...........35
Smart Control Panel® ...............36-37
Remote Control .............................37
To Erase the Memory .....................38
Maintenance .....................................39
Troubleshooting ........................... 40-41
Accessories ........................................ 42
Warranty ........................................... 43
Automatic Garage Door Opener
Safety & Maintenance Guide ..........44-45
Repair Parts .................................46-47
Owner’s Manual
B980
Belt Drive
Garage Door Opener
FOR RESIDENTIAL USE ONLY
PRE-PROGRAMMED REMOTE CONTROL
INCLUDED
www.chamberlain.com
www.mychamberlain.com
Smart Garage Opener
• Please read this manual and the enclosed safety materials carefully!
• Fasten the manual near the garage door after installation.
• The door WILL NOT CLOSE unless the Protector System® is connected
and properly aligned.
• Periodic checks of the garage door opener are required to ensure
safe operation.
• The model number label is located on the left side panel of your
garage door opener.
• This garage door opener is compatible with MyQ® and
Security+b2.0® accessories.
• DO NOT install on a one-piece door if using devices or features
providing unattended close. Unattended devices and features are
to be used ONLY with sectional doors.
To Next Page
Need help?
General
