EasyManua.ls Logo

Chamberlain B6755T User Manual

Chamberlain B6755T
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
®
®
Wi-Fi
®
LED Garage Door Opener
USER'S GUIDE
Models B4603T, B4643T, B4613T, B6713T, B4655T, B6753T, AND
B6755T
FOR RESIDENTIAL USE ONLY
Please read this guide and the enclosed safety materials carefully!
The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned.
Periodic checks of the garage door opener are required to ensure safe operation.
This garage door opener is ONLY compatible with myQ® and Security+ 2.0® accessories.
DO NOT install on a one-piece door if using devices or features providing unattended close.
Unattended devices and features are to be used ONLY with sectional doors.
Attach warning labels to the location indicated on label.
Download the myQ
®
App to Set Up an Account and Connect
Open and close your door, get alerts and set schedules from anywhere. Connected smart garage door openers also receive software updates to
ensure the opener has the latest operational features. See page 1.
Available on most iOS and Android Devices
Download the free BILT App
before assembly
Easy step-by-step
interactive 3D instructions
for this product can be found in
Download the free myQ
®
App
Monitor and control your garage
from anywhere and get real-time alerts
with peace of mind.
To register your garage door opener to receive updates and offers from Chamberlain, visit chamberlain.registria.com or use the icon below:
CHAMBERLAIN
1. Take a photo of the camera icon including
the points ( ).
2. Send it in by texting the photo to 71403 (US)
or visit www.chamberlain.photo (Global).
1
Question and Answer IconNeed help?

Do you have a question about the Chamberlain B6755T and is the answer not in the manual?

Chamberlain B6755T Specifications

General IconGeneral
BrandChamberlain
ModelB6755T
CategoryGarage Door Opener
LanguageEnglish

Summary

myQ App Setup and Registration

Download the free myQ® App

Instructions for downloading the myQ® application to set up your garage door opener account.

Safety Symbol and Signal Word Review

Mechanical Warnings

Highlights potential mechanical hazards and safety precautions.

Electrical Warnings

Highlights potential electrical hazards and safety precautions.

Important Installation Instructions

Read and Follow All Warnings

Emphasizes the critical need to read and follow all installation warnings and instructions.

Test Safety Reversal System

Requirement to test the safety reversal system after installation completion.

Important Safety Instructions

Safe Door Operation

Guidelines for operating the garage door safely, ensuring visibility and clear path.

Moving Door Hazard

Warning against crossing the path of a moving garage door for safety.

Stopped Door Hazard

Instruction not to go under a stopped or partially opened garage door.

Monthly Safety System Test

Requirement to test the safety reversal system monthly and after adjustments.

Service Power Disconnection

Warning to disconnect all electric and battery power before performing service or maintenance.

Connect With Your Smartphone

Wi-Fi Signal Strength Testing

Guide on how to check and interpret Wi-Fi signal strength in the garage.

Set Up myQ® App Connection

Download and Install myQ® App

Instructions to download and install the myQ® application for setup.

Create myQ® Account

Steps to create an account and connect the garage door opener to the myQ® app.

Remote Control Programming

Memory Erase Procedures

Camera Setup and Status

Battery Backup Operation

Protector System Sensors

Sensor Installation Warning

Warning regarding sensor installation and the need for power disconnection before installation.

Sensor Alignment and Operation

Explanation of how the door will not close if sensors are misaligned or obstructed.

Adjustment Introduction

Travel Limit Adjustment

Explanation that adjustments allow programming of door stop positions (open/close).

Program the Travel

Automatic Force Set Up

Initiate Automatic Force Setup

Procedure for the opener to automatically sense and set the force for door operation.

Test the Safety Reversal System

Safety Reversal System Warning

Warning about potential serious injury or death without a properly installed safety reversal system.

Perform Safety Reversal Test

Instructions to test the safety reversal system by using a 1-1/2 inch board.

Troubleshooting Reversal Test Failures

Steps to take if the door does not reverse upon contact with the obstruction.

Test the Protector System®

Protector System Warning

Warning about potential injury or death without a properly installed safety reversing sensor.

Test Sensor Operation

Instructions to test the safety reversing sensor by obstructing its beam.

Sensor Misalignment/Obstruction

How to identify and resolve issues with sensor misalignment or obstruction.

Troubleshooting Common Issues

Opener Will Not Close

Troubleshooting steps for when the garage door opener will not close the door.

Wi-Fi Network Connection Failure

Steps to resolve issues with connecting the opener to the home Wi-Fi network.

Garage Door Opener Safety Guide

Automatic Door Opener Safety Overview

General safety principles for garage door openers, emphasizing risks and precautions.

Garage Door Openers Are Not Toys

Instruction to discuss garage door safety with children and explain the dangers.

Stay Away From Moving Door

Safety advice to stay away from a moving garage door.

Keep Remotes From Children

Instruction to keep remote controls out of reach of children and prevent play.

Routine Maintenance

Spring Tension Warning

Warning that springs are under high tension and only qualified individuals should adjust them.

Test Opener Safety Features

Steps to test the opener's safety reversal system and photoelectric sensor functions.

Warranty Information

Related product manuals