27
Cleaning
Cleaning and Maintenance
At the End of the Day
1. Perform Steps 1-10 on the previous page.
2. Remove the upper and lower rinse and wash spray arms. The spray arms are
interchangeable.
3. Unscrew the upper and lower rinse arm spindles (A). Remove the rinse arm assemblies
4. Clean the nal rinse arm nozzles using a small paper clip (B).
5. Remove the rinse arm end plugs (C) if necessary, and ush the rinse arm with clean
water.
6. Re-install the rinse arm end plugs if they were removed.
7. Remove the wash spray arms and ush with clean water.
8. ONLY USE NON-METALLIC SCRUB PADS TO CLEAN THE INTERIOR.
9. Contact the chemical supplier for de-liming if required (see next page).
10. Wipe the interior and exterior of the machine with a soft cloth and a mild detergent.
DO NOT HOSE THE EXTERIOR OF THE MACHINE WITH WATER.
11. Reassemble the dishwasher and leave the hood open to allow overnight drying.
Paper Clip
End
Plug
B
C
Wash Spray arm
Rinse Arm Spindle
D
A
To Next Page
Loading...
Need help?
General
