203-01-7 203-01-6Disc Type Brake of the Front Wheel 203-01-7
Disassembly and Installation
BENNI MINI
Brake Caliper (12 243 0)
General Tool
Nip of the barking hose
Disassembly
Caution: If braking fluid is spattered on the
painted surface, immediately use cold water to
rinse the region.
1. Disassemble the brake disc. See the Part of brake
disc in this section for relevant information.
2. Remove the braking hose from the steering
knuckle assembly.
3. Loosen the braking hose from the brake caliper.
1. Use a suitable nip of the barking hose to clip the
braking hose.
2. Loosen the braking hose.
4. Remove the brake caliper.
5. Warning: Seal the braking hose to prevent
oil fluid from running off and dirt from
entering into.
Disassemble the brake caliper.
• Rotate the brake caliper assembly.
To Next Page
