203-06-8 Anti-lock Braking System 203-06-8
Diagnosis and Test
CHANA·BENNI MINI
DIAGNOSIS AND TESTING
Anti-lock braking control
Refer to the relevant wiring diagram in Section
203-06A for relevant structure and connection.
Inspection and Confirmation
Confirm the problems described by customers.
2. Visually measure the obvious mechanical or electric
failure.
Visual Inspection Table
Mechanical
Electric
• wheel speed sensor
• Gear ring of the wheel
speed sensor
• Insurance
• Connector
• Wiring harness
3. If the failure cause is obvious, repairing work shall
be performed as possible before the next operation.
4. If the failure cause is not obvious, confirm the failure
symptom and refer to WDS for failure cause.
To Next Page
Loading...