EasyManua.ls Logo

Changan BENNI MINI 2011 - Page 15

Changan BENNI MINI 2011
200 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100-00-11 Overview 100-00-11
Description and Operation (Continued)
Gas
See Section High Pressure Cylinder.
General Purpose Maintenance Tool / Device
All tools and devices shall be kept in the intact state,
and the appropriate safe device shall be used if
necessary.
The use of the maintenance tool / device does not
exceed the designing scope. The maintenance
device, such as the lifting device and the jack can
not be overloaded for use. Because the damage to
the device caused by the overload generally is not
significant, the fatal damage may occur when being
used for the next time.
Forbid to use the damaged or defective tool / device,
especially the high speed running device, such as
the grinding wheel. The damaged grinding wheel
will be fragmented in the conditions without any
signs and make person severely injured.
The eye protection tool shall be worn when the
grinding wheel, the chisel or the sand blasting
device is used.
The appropriate protective mask shall be worn
when the sand blasting device, the substance
containing asbestos or the mist spraying device is
used.
Confirm that there are places of well ventilation to
control the dust, acid mist and smoke.
High Pressure Air, Lubricating Oil and Oil
Testing Device
See Section Lubricating Oil and Lubricating
Grease.
Regularly check the high pressure device,
especially the connector and keep the device good.
Forbid to face the high pressure pipe orifice, such
as the diesel oil filling mouth to the human skin
because the oil will penetrate the human
subcutaneous tissue and cause the severe disease.
Legal Affairs
The material use and disposal in the
maintenance workshop shall conform to the legal
articles with regard to safety and health.
To create a safe working environment and avoid the
environmental pollution, the personnel in
the
maintenance workshop must be familiar with the
national legal articles with regard to safety and
health.
Lubricating Oil and Lubricating Grease
Avoid touching the mineral oil for a long time. All
the lubricating oil and lubricating grease have
irritability to eyes and skin.
Used oil
Touching the mineral oil for a long time will make
the person’s skin dry and have the irritability to the
person to catch dermatitis. In addition, if one uses
the mineral oil containing the toxic and harmful
substance, he will suffer from the skin cancer. The
appropriate devices for protecting and cleaning skin
must be provided.
Forbid to use the used oil as the lubricating oil or in
any device which can contact with the skin.
Health Precautions:
– Avoid touching the oil, especially the engine oil
for a long time.
– Wear the protective clothes, including the
gloves.
– Please do not put the wiping cloth with oil
stains in the pocket.
– Avoid the oil polluting the clothes.
– Please do not wear the clothes and shoes
seriously stained with oil. The protective
clothes shall be regularly cleaned.
– If injured for carelessness, perform the first aid
immediately.
– Protect hands with the protective cream before
working.
– Please wash with the toilet soap and the clear
water.
– Forbid to wash the skin with gasoline, diesel oil,
kerosene, diluents and melting agent.
– If the skin is abnormal, please go to hospital
immediately.
– Please degrease the oil first if possible.
– If the oil will cause damage to eyes, wear the
protective goggles.
Environmental Protection
The depleted engine oil only can be burnt in
the approved places. If the places can not be
confirmed, please confirm with the local authority.
The depleted engine oil must be treated by the
approved waste disposal contractor or the waste oil