204-01-6 Front Suspension 204-01-6
Disassembly and Installation
节 1.02 DIAGNOSIS AND TESTING
(b) Front supporting column assembly
Disassembly
1. Loosen the tyre bolts.
2. Hoist the automobile. See Section 100-02 for
relevant information.
3. Disassemble the wheel.
4. Remove the rotating speed sensors of the front
wheels and brake fuel pipe from the front
supporting column.
5. Disassemble the bolts of the front supporting
column and the steering knuckle.
6. Release the fixed nuts on the front supporting
column and remove the front supporting column
assembly.
Installation
1.Install the front supporting column and the fixed
uts
n
2.
Install the bolts of the front supporting column
and the steering knuckle.
Benni Mini
To Next Page
Loading...
