1
Main Burner Conversion
Your grill may differ from illustration shown. This portion of the manual covers a variety of grill styles. Use pictures as
reference only. Not all steps will apply to your grill conversion.
Make sure all Control Knobs are in the OFF position, LP Tank Valve is closed, Tank is disconnected from Regulator and
removed from Grill.
Remove Warming Rack, Cooking Grates and Troughs.
2
Front of
Firebox
Remove Hitch Pins and remove Carryover Tubes.
Remove Hitch Pins at back of Burners to detach Burners from Burner Brackets.
Lift back of Burner while sliding Burner out of Firebox, disengaging burners from Valves.
3
Hitch Pin
Hitch Pin
Carryover Tube
Burner
Burner
Insert Orifice Removal Tool provided with Kit into Firebox Burner openings and unscrew Orifices from ends of Valves. Save
removed Orifices and Orifice Removal Tool for converting back to LP Tank Gas. These grill valves are designed to work
with Natural Gas once Orifices are removed. Do not replace any Main Burner Orifices when using Natural Gas.
Valve
Orifice
Front of
Firebox
Orifice
Orifice Removal Tool
Firebox Burner Opening
Consumer must purchase Natural Gas Conversion Kit 4584625 to convert this grill to natural
gas. Use the following instructions instead of instructions found in conversion kit
23
To Next Page
Loading...
Need help?
General
