This appliance is not intended to be installed in or on an RV.
Never attempt to attach this appliance to the self contained LP gas system of a camper trailer or
motor home.
Do not use this appliance until leak-tested.
If a leak is detected at any time, STOP and call the fire department.
If you cannot stop a gas leak, immediately close LP cylinder valve and call LP gas supplier or your
fire department!
Leak Testing Valves, Hose and Regulator
1. Turn control knob to OFF.
2. Be sure regulator is tightly connected to LP cylinder.
3. Completely open LP cylinder valve by turning hand wheel counterclockwise. If you hear a rushing
sound, turn gas off immediately. There is a major leak at the connection. Correct before
proceeding.
4. Brush soapy solution onto areas circled below.
5. If “growing” bubbles appear, there is a leak. Close LP cylinder valve immediately and retighten
connections. If leaks cannot be stopped do not try to repair. Call for replacement parts. Order new
parts by giving the serial, model number and name and part number of items needed (see parts list)
to the Grill Service Center at the number listed on front cover.
6. Always close LP cylinder valve after performing leak test by turning hand wheel clockwise.
WARNING
For Safe Use of Your appliance and to Avoid Serious Injury:
To Next Page
Loading...
Need help?
General
