(B) Use a narrow bottle brush with a flexible handle (do not use a brass wire brush), run the brush
through burner tube several times.
(C) Wear eye protection: Use an air hose to force air into the burner tube and out the burner ports.
Check each port to make sure air comes out each hole.
8. Check burner for damage, due to normal wear and corrosion some holes may become enlarged. If
any large cracks or holes are found replace burner.
9. Attach electrode to burner.
10. Carefully replace control panel assembly .
VERY IMPORTANT: Burner tube must re-engage over valve opening. See illustration, shown F.
11. Reposition inner liner, cooking basket and top cover.
To Next Page
Loading...
Need help?
General
