Install Igniter battery by turning the Igniter push button cap counter-clockwise until the igniter
button detaches, then install a AA battery making sure the positive(+) end is under the push
button. Then re-attach the igniter button by turning it clockwise. Press the igniter button and make
sure all 3 igniters that are attached to the burner tubes are creating a spark.
a replacement is necessary, please call our customer service department, 912-638-4724. Do NOT use
replacement parts that are not intended for this grill.
Hint: The paper label that is affixed to the hood is more easily removed when the hood is warm. Any remaining
glue residue can be cleaned off with a spray lubricant like WD-40 . Do NOT use any other type of solvent or
cleaner because this will damage the finish/paint/coating on the grill.
To Next Page
Loading...
