ChargePoint CP6000 Series

Need help?

Do you have a question about the ChargePoint CP6000 Series and is the answer not in the manual?

Summary

Tools and Materials for Installation

List of Required Installation Tools

Comprehensive list of all necessary tools for installing ChargePoint CP6000 charging stations.

Pedestal Mount Installation Guide

Prepare Pedestal for Mounting

Detailed steps for preparing the pedestal base prior to its installation.

Mounting the Pedestal Base

Instructions for securely attaching the pedestal to the prepared concrete foundation.

Installing the Station Housing (Pedestal)

Procedure for attaching the main station enclosure to the mounted pedestal.

Installing the Cable Management Kit (CMK)

Steps for attaching the CMK to the pedestal for organized cable management.

Wall Mount Installation Guide

Mounting the Wall Brackets

Installing CMK for Wall Mount

Prepare Station Housing for Wall Mount

Installing Station Housing on Wall Mount

Wiring and Electrical Connections

Installing Circuit Sharing Jumpers

Installing the Power Plate

Connecting Station Wiring

Checking Input Voltages

Station Assembly Procedures

Connecting the Head Assembly

Installing Cable Clamps

Station Setup and Configuration

Powering Up the Charging Station

Procedure for safely powering on the charging station after installation.

Configuring and Pinpointing the Station

Steps to set up the station's network connection and precise location.

Starting a Test Charging Session

Performing a test session to verify the station's operational status.