Chattanooga Fluidotherapy FLU110D - SETUP: PREFERENCE MODE - DEFAULT SETTINGS; SETTING DEFAULT TREATMENT TIME

1919
SETUP
PREFERENCE MODE DEFAULT PARAMETERS
ENTERING “PrEF” MODE (PREFERENCE MODE)
Simultaneously press the “PRESS TO CHANGE MODE”, “INCREASE”, and
“DECREASE” buttons. “PrEF” will be displayed.
NOTE:
The “PrEF” mode allows the user to change the default settings.
TREATMENT TIME DEFAULT
Press the “PRESS TO CHANGE MODE” button
until the indicator light is flashing beside
“TREATMENT TIME”.
Press the “INCREASE” and “DECREASE”
buttons to set unit to the desired default
treatment time.
Press the “PRESS TO CHANGE MODE” button
to save the new setting.
NOTE:
The default setting is 20:00 minutes.
Fluidotherapy® - Dry Heat Therapy