13
Intelect® Legend Series Combo
NOMENCLATURE
Left Side Panel of 2Cand 4C
Operating
Channels 1/2
Time – The up/down arrows increase or decrease the default treatment time.
Power/Intensity – The up/down arrows increase or decrease the intensity/power.
Treatment Selection– There are four waveform selections, plus Ultrasound and Combo.
Start – This button will start the treatment on the selected channel.
Stop – This button will stop the treatment on the selected channel.
Pause – This button will pause the treatment on the selected channel.
Operating Channels – Model 2C of the Intelect® Legend Series Combo provides two
channels of electrical stimulation and one channel of ultrasound. Model 4C provides four
channels of electrical stimulation and one channel of ultrasound.
Stimulation Output Channels – The lead wires connect to these ports.
Ultrasound Port – The Intelect Legend Series Combo includes a 5 cm
2
ultrasound
applicator, which connects to the port marked Ultrasound. The advanced electronics
of the Intelect Legend Series Combo transmits stored data from the applicator to the
unit each time the device is powered on and ultrasound is accessed. This sophisticated
Electronic Signature™ assures accurate calibration with any of the interchangeable
applicators.
To Next Page
Loading...
