Intelect® RPW
SAFETY INSTRUCTIONS
14
PROTECTION OF THE UNIT
Improper installation, operation or maintenance of the radial pressure
wave unit may result in malfunctions of this unit or other devices.
Before connecting the unit, make sure that:
• The voltage rating on the safety label corresponds to the
available system voltage.
• The frequency rating on the rating plate corresponds to
the system frequency.
• An earthed socket outlet with earthing contact is available
for connecting the unit.
• The routing of the power cable from the unit to the socket
outlet with earthing contact does not pose a danger for
personnel or the patient.
Make certain that the unit is electrically earthed by connecting only to
a earthed electrical service receptacle, conforming to the applicable
national and local electrical codes.
To Next Page
Loading...
Need help?
General
