QUICK START GUIDE
EN
REVOLUTION WIRELESS™
Note
- It is strongly advised to carefully read the contraindications and safety measures described in
chapter 1 and 2 in this manual before using your device.
- For detailed information on usage read the entire user manual.
1. Turn the Remote Control on, by pressing the On/
Off button.
2. Upon activation the screen displays a list that
gives you access to the categories of programs.
3. Select a program category and a program within
the category by using the navigation pad
(up/down).
4. Confirm your choice with the center button.
5. Stick the electrodes on the patient and connect
the modules.
6. Turn on the modules, being careful to respect the
order of activation of the modules, the turning-on
order corresponds to the channel numbering.
To Next Page
