Need help?Do you have a question about the CHCNAV CHC X900U+ GNSS and is the answer not in the manual?
Covers warnings, cautions, regulations, and proper use/care for the GNSS receiver.
Details how to get technical help, legal disclaimers, and user comment submission.
Introduces the X900U+ receiver, its design, and details its front panel, lower housing, and ports.
Explains internal battery charging, safety precautions, and external power supply options for the receiver.
Lists and illustrates the basic supply accessories included with the X900U+ GNSS receiver.
Details connecting the receiver to a controller via Bluetooth and the process for firmware upgrades.
Outlines the procedures for downloading GNSS measurement data from the receiver.
Provides guidelines for optimal GNSS antenna placement and satellite signal reception for rover operation.
Details how to configure the rover station for receiving static data or corrections via cellular modem using LandStar 7.
Guides on creating new survey projects and defining/adding points within the LandStar 7 software.
Details methods for measuring points, including PDA mode, and performing site calibration for coordinate transformation.
Explains how to perform base shift operations and export survey data in various formats.
Describes the process for registering the receiver to ensure continued software functionality.
To Next Page
General
