Check Point 4800 - Attaching the New Warranty Sticker; Confirm Appliance Operation; Apply Warranty Sticker; Record Upgrade Details

P. 6
3. Make sure the memory DIMM(s) are installed correctly.
a) Connect the power cords to the appliance.
b) Turn on the appliance using the power switch at the rear of the appliance.
c) Make sure that the LCD screen shows the appliance model.
d) Turn off the appliance and remove the power cords.
4. Replace the cover on the appliance.
Attaching the New Warranty
Sticker
After you install the new memory DIMM(s), attach the new warranty sticker on the appliance.
Important - Failing to attach the new warranty sticker correctly will void the warranty of the
appliance.
To attach the new warranty sticker:
1. Make sure that the appliance operates correctly.
2. Attach the new warranty sticker from the upgrade kit to the appliance.
The warranty sticker covers an appliance cover screw.
3. Clearly write this information on the sticker:
 Date of upgrade.
 Current RAM memory and LOM card configuration of the appliance.