Procedure for Smart-1 6000-L/6000-XL Appliances
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Line Cards|19
3.
If you have transceivers for your expansion line cards, install them now.
See
"Replacing a Transceiver" on the next page
.
If not, install them later.
4.
If AC PSUs are installed in the appliance:
Connect the power cables from the AC PSUs.
5.
If DC PSUs are installed in the appliance:
Connect the safety ground wires from the DC PSUs.
Connect the DC power connectors from the DC PSUs.
6.
If you opened the hook-and-loop straps, close them to secure the system cables.
7.
Make a loop and secure the power cables to the PSUs using the retention strap.
8. Press the Power button on the front panel to turn on the Security Management Appliance.
To Next Page
Loading...
