Safety Instructions
Quantum Smart-1 600-M/6000-L/6000-XL Appliances Replacing Line Cards|5
Safety Instructions
n Lift the appliance with assistance. To avoid injury, do not attempt to lift the appliance by yourself.
n Opening or removing the appliance cover, while the appliance is powered on may expose you to a
risk of electric shock.
n Do not operate the appliance without the cover for more than five minutes. Operating the appliance
without the cover can result in component damage.
n Many repairs may only be done by a certified service technician. Only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the technical support.
n We recommend that you always use an antistatic mat and antistatic strap on your wrist, while
working on components inside the appliance.
n To ensure proper operation and cooling, all bays in the appliance and cooling fans must be always
populated with a component or a blank.
For more information, see the
Enterprise Products Safety, Environmental, and Regulatory Information
booklet supplied in the original appliance shipping carton.
Best Practice - We recommend that only experienced personnel install or remove
hardware components. Installing or removing components incorrectly can
permanently damage the Security Management Appliance.
Important - Make sure that you are electromagnetically grounded when working with
hardware components of the appliance. ESD (electrostatic discharge) can damage the
appliance.
To Next Page
Loading...
