Name: Check Point Smart-1 225
Brand: Check Point
Rating: 4 (1 reviews)

To Next Page

Classification [Protected] P/N:705871 | 1

For a list of our trademarks, please refer to: http://www.checkpoint.com/copyright.html.

For a list of our Third Party Copyright notices, please refer to: http://www.checkpoint.com/3rd_party_copyright.html

Installing a Smart-1 LOM Card

705871

Protected

2014

This document is for Smart-1 225, Smart-1 3050, and Smart-1 3150 models.

Important

 Read the Health and Safety Information in the Getting Started Guide

(http://supportcontent.checkpoint.com/documentation_download?ID=32309).

 To protect the appliance and LOM card from electrostatic discharge, make sure that

you are grounded.

 We recommend that you use an ESD grounding wrist strap. Connect the grounding

plug on the wrist strap to the chassis grounding point.

Preparing the Appliance

Before you start to install or remove the LOM card, make sure that:

 The appliance is in a clean environment and on a level surface.

 You can physically access and open the cover of the appliance.

 You can connect to the WebUI or CLI.

 You have the Check Point LOM card RMA kit.

RMA Kit Contents

 FRU Installation Guide

 LOM card

 Screwdriver

 RMA kit sticker

 ESD grounding strap (anti-static)

Check Point Smart-1 225 Installing

Other manuals for Check Point Smart-1 225