SoftLabelDeactivation
• Labels are not reusable and stay on a product during and after purchase.
• The labels must be cancelled or turned off prior to the customers leaving the store.
• This process is called “Deactivation”.
• The deactivation equipment come in several forms. All forms are wired to a Chassis.
• It is essential that the chassis is switched on.
• An illuminated green light on the front of the chassis indicates it has power and is
operational.
PointofSale
While handling a transaction, cashiers
should pass each product over the
deactivators, holding the items as low as
possible. Any folding of clothing should
occur on the deactivation location only after
the product is passed over the deactivation
location.
Depending upon the programming, a beep
might or might not sound to indicate a label
is deactivated.
22
To Next Page
Loading...