3
1. SAFETY INFORMATION
(안전 규정)
2. GENERAL SPECIFICATIONS
(일반 사양)
(측정 사양)
(각부 명칭)
(기능상의 특징)
(건전지의 교체)
(유지 및 보수)
3. MEASURING SPECIFICATIONS
4. PANEL DESCRIPTION
5. DESCRIPTION OF FUNCTIONS
7. BATTERY REPLACEMENT
8. MAINTENANCE
4
7
8
10
11
20
21
........................
...................
...............
..........................
.............
.....................
...................................
CONTENTS
(목차)
(측정 방법)
6. HOW TO MAKE MEASUREMENTS
14
..........
6-1. AC CURRENT MEASUREMENTS (교류 전류 측정)
6-2. DC CURRENT MEASUREMENTS(직류 전류 측정)
6-3. VOLTAGE MEASUREMENTS(전압 측정)
6-4. RESISTANCE MEASUREMENTS (저항측정)
6-5. CONTINUITY TESTING (도통 시험 )
6-6. FREQUENCY MEASUREMENTS (주파수 측정 )
4
1. SAFETY INFORMATION
This digital clamp meter has been manufactured and test-
ed in accordance with IEC10101/EN61010-1 Part 1 (Safety
Requirement for Electrical Equipment for
measurement, control and laboratory use, Safety Class ,Ⅱ
Overvoltage category ), and EN61326 / IEC61326Ⅱ
(EMC Requirement for Electrical Equipment for
measurement control and laboratory use).
Before use, please read this manual thoroughly.
After reading it, keep it together with the product for ref-
erence to it when necessary.
This manual contains information and " WARNING"
which must be observed to assure safe operation and
maintain the meter in safe condition.
본 디지털 클램프 미터는 IEC1010-1/EN61010-1과 EN61326/IEC61326의
최신 전기 안전규격에 의해 시험, 생산된 제품으로 휴대하여 안전하고 편리
하게 사용하실 수 있으며, 특히 빠르고 정확한 측정 및 과입력 보호회로를
내장하여 고장을 최소화 하였습니다.
신체적 손상 및 제품의 안전을 위해 사용하시기 전에 사용설명서의 "경고"
나 에 관한 내용을 잘 읽어 주시기 바랍니다."주의"
1-1. Explanation of safety symbols
The meaning of the symbols used in this manual and
attached to the product is as follows.
Very important instruction for safe use.
●The warning massages are intended to prevent
accidents to operating personnels such as burn and
electrical shock.
●The caution messaged are intended to prevent damage
to the instrument.
: Dangerous voltage (Take care not to get an electric
shock in voltage measurement.)
안전 규정
To Next Page
Need help?
General