Chapter I. Unified Boot Option ROM
Chelsio Unified Boot 14
viii. Flash the unified Option ROM onto the Chelsio adapter using the following command.
C:\CHELSIO>cfut4 -d <idx> -ub cubt4.bin
Here, cubt4.bin is the unified option ROM image file present in the CHELSIO directory.
ix. To configure the base MAC address (optional), use the below command.
C:\CHELSIO>cfut4 -d <idx> -um <Hex MAC Address>
Example:
C:\CHELSIO>cfut4 -d 0 -um 000743000123
x. Reboot the system for changes to take effect.
To Next Page
Loading...